Pot d’escuma adhesiva per a panells Illbruck 750ml PU010
Pot d’escuma adhesiva per a panells Illbruck 750ml PU010
No se pudo cargar la disponibilidad de retiro
SKU:1801072
Ver todos los detalles
Descripción
The PU010 adhesive is ideal for the rapid installation of insulation and acoustic panels, EIFS and ceiling insulation. Suitable for use on many different substrates, including masonry, concrete, wood and metal.
FEATURES
- An easy-to-use alternative to dry-mix mortars and wall adhesives
- Ideal for bonding plasterboard, insulation and EIFS
- Forms a high-strength bond after just 40 minutes
- Expands to fill gaps, cavities and uneven surfaces
- Compatible with a wide range of substrates in construction
- Load-bearing time after approximately 3 hours
- Fast curing, skin formation in 10 minutes
- No subsequent expansion or shrinkage
SPECIFICATIONS
|
Characteristics |
Standard |
Classification |
|
Reaction to fire |
DIN 4102-1 |
B2/B1 |
|
Foam type |
NBS |
|
|
Quality |
EIFS |
|
|
Component system |
One-component |
|
|
Propellants |
Yes |
|
|
Aerosol temperature limit |
10 ºC – 30 ºC |
|
|
Ideal aerosol temperature |
20 ºC |
|
|
Ambient temperature limit |
5 ºC – 35 ºC* |
|
|
Density |
LAB 015 |
15 - 25 |
|
Skin formation (min) |
FEICA TM 1014 |
10 |
|
Cutting time (min) |
FEICA TM 1005 |
35 |
|
Load-bearing capacity (hours) |
3 |
|
|
Yield |
FEICA TM 1003 |
30 l |
|
Thermal conductivity (mW/m.K) |
EN 12667 |
36 |
|
Elongation at break (%) / dry |
FEICA TM 1018 |
14 |
|
Compressive strength @ 10% (kPa) / dry |
FEICA TM 1011 |
44 |
|
Compressive strength @ 10% (kPa) / wet |
|
32 |
|
Shear strength (kPa) / dry |
FEICA TM 1012 |
51 |
|
Temperature resistance (long term) (°C) |
|
-40 ºC – 90 ºC |
|
Temperature resistance (short term) (°C) |
|
-40 ºC – 130 ºC |
|
VOC (%) |
|
17,49 |
|
VOC (g/l) |
|
180,00 |
|
Storage |
|
24 months |
APPLICATION TIPS
- Shake the can vigorously at least 20 times.
- Remove the protective cap from the can and place the top end into the adapter of the illbruck PU foam gun.
- Spray a bead of illbruck PU010 adhesive foam around the perimeter and in the centre of the back of the insulation material.
- Always handle the can in an upright position for best results and ensure that the valve is facing downwards.
- Move the panel into place and press firmly to ensure good contact. Hold it in position for 2–3 minutes. Heavy panels may require additional support during curing.
